Problem: I added a new Lonsdor JLR Key to a Land Rover Discovery 2018 with a K518ISE Key Programmer. All buttons open, close & boot work fine. But Keyless not working on your keys. Only I can start the car if I put the key to the emergency point on the car.
What's the problem? Please advice.
Solution
In case remote & emergency work fine but without a keyless function, it needs to close the UWB function.
How to close UWB in Lonsdor K518?
Immo & Remote >> Land Rover >> Select from vehicle >> Land Rover(2018-) >> Smart Key >> Modify vehicle cofig >> Close UWB
Note:
Please be sure to open the Lonsdor JLR License before programming add key & all keys lost for 2015-2020 Jaguar/ Land Rover.
Feedback:
Thanks to Obd2shop.co.uk, the problem was solved!
Hope this is helpful.
.jpg)
