Lonsdor K518 PRO Programs 2011 Land Rover Discovery 4 key

This guide explains how to program new smart keys for a 2011 Land Rover Discovery 4 when all keys are lost, using the Lonsdor K518 PRO.

Tools Required:

Lonsdor K518 Key Programmer

OBD communication cable

Lonsdor JLR Smart Key

Step-by-Step Procedure:

1. Connect the Tool:

Plug the OBD cable into the vehicle's OBD port and into the Lonsdor K518.

2. Generate Smart Key:

From the main menu, select "Generate Smart Key" → Land Rover → Land Rover 433 ID49.

Place the new smart key into the K518 PRO slot and select "Generate."

Wait for the "Generation Successful" message.

3. Program the Smart Key:

Return to the main menu and select

Immobilizer & Remote → Land Rover → Select from vehicle → Discovery 4 → Program Smart Key → All smart keys lost.

Turn on the hazard lights when prompted.

4. Follow On-Screen Instructions:

The tool may ask if you want to program additional keys. Confirm or cancel as needed.

Hold each key in your hand as instructed and follow all prompts carefully:

Please switch the ignition off.

Programming...Within 5s, press the smart key(to be added)' unlock button once.

Locking... Within 5s to click the unlock button of the smart key to be added once.

5. Complete the Process:

Once programming is complete, test each key:

Step on the brake and press the start button.

Verify that the engine starts.

Test the remote lock and unlock functions.

Result:

Both keys should start the vehicle and operate the remote functions normally.

This Lonsdor K518 PRO tutorial helps you successfully program all-new smart keys for the Land Rover Discovery 4 - even in a full key-loss situation.

www.obd2shop.co.uk

Lonsdor K518 PRO Program 2024 Nissan Rogue All Keys Lost

Learn how to program the 2024 Nissan Rogue all keys lost using the Lonsdor K518 PRO Key Programmer via OBD. This step-by-step tutorial covers BCM connection, key ID reading, and smart key programming for a complete vehicle restart.

Tools Required

Lonsdor K518 PRO

NISSAN 40PIN-BCM Cable

2024 Nissan Rogue

A New Key

Immo & Remote >> NISSAN >> Select from vehicle >> North America >> Rogue >> 2021-2023 >> Smart key(PUSH button) >> All smart key lost

This function requires unplugging the BCM connector, then using the Nissan-40 Specific Cable to connect the BCM, and pressing OK to continue.

All keys of this vehicle must be reprogrammed. Press OK to continue.

Turn the ignition off.

Turn on Hazard warning lights.

Stay at P or Neutral gear;

The steering column is in the unlocked state.

Press OK.

Start to read the key ID:

Place a smart key (to be programmed, with the logo facing upwards) flat on the ignition switch, ensuring the key's logo end is directly aligned with the ignition.

Note:

1. Do not move the key from the ignition.

2. Do not press any button.

3. Do not insert or remove the little mechanical key from the key.

Press OK.

Count of new keys: 1

Count of old keys: 0

Current key count in total: 1

Here requires to read ID of the keys to be programmed.

Click Cancel to go to the next step.

28-bit PIN has been read out.

It can be used when the program key is on AKL condition!

Start to program the key.

Place a smart key (to be programmed, with the logo facing upwards) flat on the ignition switch, ensuring the key's logo end is directly aligned with the ignition.

Press OK.

Programmed successfully, press Cancel to complete.

Count of keys programmed successfully: 1

1. Press each key's Lock and Unlock buttons, and check if it works normally.

2. Check if each key can start the car separately after finishing the above operations. Click OK to end the procedure.

After checking all keys, do not exit this function.

Operate as per the prompts below and click OK:

1. Unplug the connector, reinstall the vehicle's gateway module.

2. Connect the device to the OBD port, and turn the ignition on.

Test the new key, and all can work well.

Successfully done.

www.obd2shop.co.uk

Lonsdor K518 PRO Program 2024 BYD Qin L Smart Key OK

Here are the original car keys and a new key. We're using the Lonsdor K518 PRO to program the key adding for the 2024 BYD Qin L by OBD.

When programming car keys, all keys must be reprogrammed together. It doesn't matter if a key is old or new - any key that isn't reprogrammed will no longer work.

Immo & Remote >> BYD >> Smart Key >> Qin Series

Qin L is a new model launched in 2024. K518 PRO hasn't added it to the menu yet, so we'll select the "Qin Plus" option here.

Qin Plus >> 2023- >> Read Key Info

Put the original car key in the sensing area in the cup holder.

The number of programmed keys: 1

Program Smart Key >> OK

Keep the key in the sensing area.

Programming succeeds.

Press Yes to program the next one.

Take out the original key, and put the new key into the sensing area.

Program successfully.

The number of programmed keys: 2

Test the original key and the new key.

Both remote controls work normally and can start the car.

Done.

www.obd2shop.co.uk

How to use Lonsdor K518 PRO to Program BYD Destroyer 05 Smart key

This post will guide you on how to use Lonsdor K518 PRO to program a 2023 BYD Destroyer 05 smart key.

The tools we need:

An original key

A new key

K518 PRO

Procedure:

Note: When we make the key of this car, all the keys, including the original car key and the new key, need to participate in programming.

Now, we use K518PRO to program the key.

Select [IMMO] >> [BYD] >> [Smart Key programming] >> [Destroyer 05].

Step 1. Read the key information.

Place the original car key in the sensing area, and click "OK" to continue.

The number of keys is 1.

Step 2. Program the key.

Now, we do the key programming.

The current number of keys is 1.

Place the key to be programmed on the induction coil, We just did it.

Click "OK" to continue.

Programming success.

Whether to program the next one? Here, we select "OK".

Then, take out the original key and put the new key in.

Matching in progress; please wait...

Programming success.

Whether to program the next one?

We choose "Cancel", and the number of successfully programmed keys is 2.

Let's test whether the two keys can be remotely controlled normally.

Use the K518PRO to successfully program the smart key for the December 2023 BYD Destroyer 05 password-free programming.

Video guides:

www.obd2shop.co.uk

Lonsdor K518 PRO Program 2024 Volvo XC40 Smart Key on Bench

Lonsdor K518 PRO can program a smart key for the 2024 Volvo XC40 on the bench. The procedure is applied to key adding & all keys lost. Now I have 2 keys: a new key and the original key. Let's start to do step by step.

We need to disassemble the CEM and read the data inside.

Follow the operation to connect the CEM module. It's under the steering wheel. Take the box off, it only has 3 ports on it.

We've got the board from the dismantled CEM module.

Solder the wire and then connect to KPROG's Adapter.

Since we haven't updated the XC40 menu of the K518 PRO device, the XC40 program is unavailable for the 2024 model. But the XC60 program works

(Sometimes switching XC40 and XC60 program will work)

Immo & Remote >> VOLVO >> XC60 >> 2022- >> Program smart key >> Operation instruction

Match the board and chip model to solder.

After successfully welding the cables, connect to the KPROG adapter.

Be aware that the connecting cable shouldn't be too long. And plug in the power supply.

Read CEM data >> OK >> Save data file

After saving data, we can go back to add the smart key or all key lost.

Select a method to obtain the security code >> Load CEM module data

Performing this function will delete all the programmed keys. Please prepare all the keys to be programmed.

We got all keys ready, both keys are here.

Click OK.

The current of keys: 2

All keys are currently cleared.

The current of keys: 0

Please place the programming key in the sensing area. For this car, the armrest box is the sensing area. Put the key here, click OK.

The current number of key: 1

Whether to program the next key? Yes.

Just take the first key out and put another key there, click OK.

The current of keys: 2

Program complete.

Let's check whether the key can be used normally.

Lock and unlock OK, start car OK.

Done.

www.obd2shop.co.uk

Lonsdor K518 PRO Program 2021 Honda Civic All Key Lost Success

Now we are using the Lonsdor K518 PRO to program all keys lost for the 2019-2021 Honda Civic by OBD. As we have a new key at hand, let's get started.

Immo & Remote >> Honda >> Select by vehicle >> Asia >> Civic >> 2019-2021 >> Smart Key >> Push-button 47 chip >> All smart keys lost by OBD >> OK

Turn off the ignition.

We've lost all the keys, so we can't turn the ignition on.

Place a key to be programmed in the car, and take other keys out of the car.

Press the Start button twice to see if the car ignition is on.

Now we can't turn the ignition on, click "Cancel".

Press and hold the Start button.

Now the ignition has been turned on, click OK.

Enter the count of keys to be programmed: 1

Is it a new model car after 2020? Yes

Turn off the ignition in 15s.

Turn on the ignition in 15s.

Press the start button twice to turn on the ignition.

Whether the immobilizer light is off? Yes

Turn off the ignition in 15s.

Turn on the ignition again.

K518 Pro shows the current number of key: 1

Click OK.

Please turn off the ignition switch.

Turn on the ignition.

Please check whether each key can be used normally.

Turn off the ignition.

See if the remote control works properly.

Lock and unlock work. The key can start the car.

Done.

www.obd2shop.co.uk