New! Lonsdor LT30-02 Smart Key for 2024- Toyota Camry Sienna

New release! The Lonsdor LT30-02 Universal Smart Key is the new LT Series used for Toyota 4A-AA and 4A-BA. It works with the Lonsdor K518 PRO key programmer. The Lonsdor LT30-01 has the same functions as the Lonsdor LT30-01, with only a difference in the circuit board.

Board Number

4A-AA: 2000

4A-BA: 2561, 0110, 1320, 2550

Frequency

312.09/314.35MHz

312.50/314.00MHz

314.00/312.50MHz

314.35/312.09MHz

314.35/315.10MHz

315.10/314.35MHz

315.10MHz

433.58/434.42MHz

433.92MHz

434.42/433.58MHz

Supported Models

Camry(2024-)

Sienna(2024-)

Corolla(2022-)

Corolla Cross(2022-)

Levin(2022-)

www.obd2shop.co.uk

Lonsdor K518 PRO Program 2023 Buick GL8 Century via DOIP

Lonsdor K518 PRO is now able to program key addition and all keys lost for 2023—Buick GL8 Century and 2021-2022 Geely Monjaro. You need to use the new Lonsdor DOIP Cable, which is risk-free, convenient, and easy to use.

Following is programming 2023 Buick GL8 Century AKL for example.

Find the sensing area near the cigarette lighter.

IMMO & Remote >> Buick >> China >> GL8 Century >> 2023 >> Smart Key System(DOIP) >> All Smart Keys Lost

Lonsdor K518 prompts this function to require the DOIP Cable to connect the OBD port.

Turn on the ignition switch.

Since we didn't activate the car, turn on the hazard light. Press the ignition switch several times to activate the car system.

This car requires a password query on 3rd part platform. Please save the screenshot and inquiry password using VIN.

After getting the password, click OK.

Enter the password and authorization code(4 digits).

It takes about 10 minutes to configure the system...

Please put a key to be programmed into the key slot next to the cigarette lighter.

Leave it here and take the other keys outside the car.

At the same time, press and hold the ignition switch over 2s to 5s.

The dashboard shows No.2 key is ready, click OK. That means the 1st key is programmed.

Put another key to be programmed into the key slot, and take the 1st key out.

Press and hold the ignition switch over 2s to 5s.

The dashboard shows No.3 key is ready.

Key programming is successful, click OK.

The current count of keys: 2

Program completed.

Test the remote control, lock and unlock can work.

Both keys can start the engine.

Done.

www.obd2shop.co.uk