Lonsdor K518 PRO Program 2024 Nissan Rogue All Keys Lost

Learn how to program the 2024 Nissan Rogue all keys lost using the Lonsdor K518 PRO Key Programmer via OBD. This step-by-step tutorial covers BCM connection, key ID reading, and smart key programming for a complete vehicle restart.

Tools Required

Lonsdor K518 PRO

NISSAN 40PIN-BCM Cable

2024 Nissan Rogue

A New Key

Immo & Remote >> NISSAN >> Select from vehicle >> North America >> Rogue >> 2021-2023 >> Smart key(PUSH button) >> All smart key lost

This function requires unplugging the BCM connector, then using the Nissan-40 Specific Cable to connect the BCM, and pressing OK to continue.

All keys of this vehicle must be reprogrammed. Press OK to continue.

Turn the ignition off.

Turn on Hazard warning lights.

Stay at P or Neutral gear;

The steering column is in the unlocked state.

Press OK.

Start to read the key ID:

Place a smart key (to be programmed, with the logo facing upwards) flat on the ignition switch, ensuring the key's logo end is directly aligned with the ignition.

Note:

1. Do not move the key from the ignition.

2. Do not press any button.

3. Do not insert or remove the little mechanical key from the key.

Press OK.

Count of new keys: 1

Count of old keys: 0

Current key count in total: 1

Here requires to read ID of the keys to be programmed.

Click Cancel to go to the next step.

28-bit PIN has been read out.

It can be used when the program key is on AKL condition!

Start to program the key.

Place a smart key (to be programmed, with the logo facing upwards) flat on the ignition switch, ensuring the key's logo end is directly aligned with the ignition.

Press OK.

Programmed successfully, press Cancel to complete.

Count of keys programmed successfully: 1

1. Press each key's Lock and Unlock buttons, and check if it works normally.

2. Check if each key can start the car separately after finishing the above operations. Click OK to end the procedure.

After checking all keys, do not exit this function.

Operate as per the prompts below and click OK:

1. Unplug the connector, reinstall the vehicle's gateway module.

2. Connect the device to the OBD port, and turn the ignition on.

Test the new key, and all can work well.

Successfully done.

www.obd2shop.co.uk

How to Convert LT20 Smart Key Type in Lonsdor K518 PRO?

This is a tutorial on how to convert the LT20 Smart Key type in Lonsdor K518 PRO. We'll need an original key for detecting first.

Special Functions >> Key settings >> LT smart key >> Convert smart key type

This function requires an Internet connection.

Push open the card slot's baffle on the device.

Place the key to be generated into the K518 PRO card slot.

Press "OK".

Selected "By identifying working key".

Please place a working key into this K518 PRO card slot.

In the frequency test, slowly take the LT20 smart key 20cm away from the card slot.

Now we can see the frequency of the working key.

Current frequency: 433.58/434.42 MHz

Select the frequency we just detected >> Choose the button type same as the working key

Working key identification is complete.

Please put the LT20 smart key back into the K518 PRO card slot to generate.

Start to convert...

Generated successfully.

If the key has a remote but no smart function after key programming is successful, please enter the "Modify frequency" function menu to change.

Done.

www.obd2shop.co.uk