No Lonsdor k518 or KH100, how to unlock FT01 smart key manually?

Lonsdor announcement:
There is unlock function of FT01 in Lonsdor KH100 now. and we will release this function to k518 recently. for those who have kh100 or Lonsdor k518, they can unlock ft01 in the device. for those who don't have Lonsdor kh100 or k518, they can unlock ft01 manually according to the instruction below.

How to Unlock Lonsdor FT01 smart key?
The concept of unlocking: Toyota smart key, once been programmed to a car, it cannot be programmed to another car, unless been unlocked.

Unlock steps:
 1. First press and hold the 1, 2, and 3 buttons at the same time (according to the order shown in the following figure), after the indicator is on, release the 3rd button.
2. Keep pressing the 1st and 2nd buttons. After the light is off, press the 3rd button again. Then the light is on and releases the 3rd button.
3. Repeat the second step 10 times or more until the indicator light flashes continuously, then you can release 3 buttons.
4. After the indicator light stops, the smart card is unlocked and can be used as a new card.
5. If you do not understand the above steps, you can refer to the attached video
https://youtu.be/W_3HjcDcCNA

Image: this is Lonsdor FT01 Series Toyota Smart Key 0020

How to Convert FT01 Key Type? 
Function of Converting FT01 Key Type: support converting the function of the third key on FT01/FT02 in default factory-fresh condition. Support switching the third key to trunk/tailgate.

Procedure:
1. Remove the button battery of the smart key

2. Enter "Special Features" → "FT01" → "Key Type Conversion" option. This option supports converting the third key into car type (trunk) or SUV type (tailgate).

3. Select corresponding vehicle type option and operate according to prompts

4. If the device shows "convert chip failed" during the process, probably the device doesn’t identify the chip. Please change inductive positions (horizontal, vertical or on the side) of the chipboard, then press "execute" and operate again until the device shows "convert chip success".
5. During the process, the device will show "please remove FT01 battery and reinsert", please make sure the battery in the smart key has been taken away and press "ok".The process is finished when the device shows "convert chip success".

Remark:
For those smart keys version under V02.53, have to remove the battery to convert successfully.

For that version higher than V02.53, to remove the battery or not doesn’t have any influence to the process.

How to Update the FT01 Program? 
Enter "Special Features" → "FT01" → "Get Version Information" option to get version information of Toyota smart keys.

For those keys version under V02.53, update the program in "Special Features" → "FT01" → "Update Program" option.

For those versions higher than V02.53, no need to update the program.

Thanks.

http://blog.obd2shop.co.uk/lonsdor-k518-adds-ft01-toyota-smart-key-unlock-function/

Lonsdor K518 Tech: how to get the System Log

This post will teach you how to get the System Log from your Lonsdor K518ise/K518s.

Here comes the procedure:

Step 1. Hold those two buttons marked in red at the same time

then, you will enter the interface below:

Step 2. Click "System Information" once, then click the area marked in red for five to eight times in one second continuously and quickly. And then click the area marked in green once.

After that, you will enter the interface below once again.

Step 3. Hold the return key of the device for several seconds

then you will enter the interface as shown below. Click "Get System Log", then click "SD Card Scan".

After that, connect the device to a computer and you will find a file named "System Log".

Done!

How does Lonsdor KH100 copy 8C / 7935, identify coil / remote, simulate chip?

obd2shop.co.uk uploaded several youtube videos on how does Lonsdor KH100 copy 8C &7935, identify coil & remote, simulate chip and how to register Lonsdor KH100.

Copy 8C chip with Lonsdor KH100:
https://youtu.be/pQFnCplGwwk

Copy 7935 chip with Lonsdor KH100:
https://youtu.be/0UMd6mw2TzQ

Identify coil with Lonsdor KH100:
https://youtu.be/kpKpOk1awSI

Identify remote frequency with Lonsdor KH100: 
https://youtu.be/yzDT3OVav1g

Simulate chip with Lonsdor KH100:
https://youtu.be/vjCClMhA6H0

How to register Lonsdor KH100 key remote programmer?
https://youtu.be/9Wwrl8pvwQY

Lonsdor KH100, a cheap but powerful device, read details:
https://www.obd2shop.co.uk/wholesale/lonsdor-kh100-full-featured-key-mate.html

Lonsdor K518S K518 remote /smart key generation full list

Lonsdor K518S K518 newly release the remote /smart key generation function, one extra cable will be needed (charge 9.99USD). If you have one Lonsdor K518S / K518, please upgrade first and you will see the option "Generate RKE".

This is the cable for remote /smart key generation.

Open Lonsdor K518 to upgrade the newest version and have a new option "Generate RKE". 

Remote /Key Type List:

Tap "Generate RKE" and have an overview. 
1. Choose the area incl. America, Europe, Asia, China, etc.

2. Come to America option
GMC
Buick
Ford
Hammer
Cadillac
Chrysler
Lincoln
Chevrolet

3. Come to Europe option
Audi
BMW
Mercedes Benz
VW
Jaguar
Opel
Skoda
Volvo
Citroen
etc

4. Come to Asia option
Honda
Toyota
Lexus
Suzuki
Mazda
Nissan
Acura
Kia
Mitsubishi
Ssang Yong
Subaru
Isuzu
etc.

5. Come to China option
Mini car
Truck
Passenger car
Domestic EV

1) China Mini Carx

2) China Domestic EV

3) China Passenger car

4) China Truck

To be continued...

Such one small cable is so powerful to turn Lonsdor K518S to be one powerful remote /smart key generation tool. 

Lonsdor KH100 simulate what chip and generate what chip & key?

Topic: being a Remote Key Programmer, Lonsdor KH100 can simulate what chip? can generate what chips and what keys? what special features Lonsdor KH100 has?

Firstly, come to Lonsdor KH100 menu, you can see it has options: 
Identify Copy
Access Control Key
Simulate Chip
Generate chip
Generate key
Identify Coil
Remote Frequency
Special Function
Settings

Next is to select "simulate chip" and has a chip list:  
Simulate 4D chip
Simulate 46 chip
Simulate 48 chip
Put Lonsdor KH100’s antenna at the ignition switch(as shown), choose the corresponding chip
type to simulate.

Next is to select "Generate chip" and has a chip list: 
4D
46
48
T5
7935
8A
4C
Others 

Put the above chip into the induction slot(as shown), choose the corresponding chip to operate according to the prompts.

Note: some chip data will be covered and locked.

Then is to select "Generate key" and has a menu:
Generate Remote (Generating various type)
Generate smart key

1) Lonsdor KH100 generates Remote, the following cars' remote is tested ok: 
Buick
Ford
GMC
Hammer
Cadillac
Chrysler
Lincoln
Chevrolet
Audi
BMW
Benz
VW
Jaguar
Land Rover
Opel
Skoda
Volvo
Honda
Toyota
Lexus
Suzuki
Mazda
Luxgen
Nissan
Acura
Kia
Baojun
Beiben H
Baic
Besturn
BYD
Changhe
Maxus
Dongfeng
Southeast
PLC
Steel Ma
Steel Lea

Enter [Generate key]->[Generate remote], select the corresponding vehicle type to
generate remote control(as shown) according to different regions.

2) Lonsdor KH100 generates a smart key, the following cars are tested OK: 
Jeep
Baic
BYD
Buick
Dodge
Southeast
Geely
Cadillac
Maserati

Enter [Generate key]->[Generate smart key] menu, select the corresponding vehicle
type to generate smart key/card(as shown) according to different regions.

Put KH100 antenna close to the pre-determined position. If signals are identified, the device will make sounds continuously.

Lonsdor KH100 has special features
Detect Infrared signal
Toyota smart key (Unlock Toyota smart key)
Garage door
Fixed code remote copy
Fixed code remote editing
and more...

1) Detect infrared signal
Put remote control at the infrared signal detection area, press the remote's button
once. When the light on KH100's screen is on, it indicates there is an infrared signal,
otherwise there is no signal(see below pic).

(signaled)

(no signal)

2) Unlock Toyota smart key
Put in smart key, click OK to operate.

Enjoy

Lonsdor KH100 update is possible.  Enter the settings menu, connect the device to a network, then select [check for updates], one-click online upgrade.