How to Lonsdor K518 PRO to Program a 2024 Volvo S60 Smart Key

This guide outlines the procedure for programming a new smart key for a 2024 Volvo S60 using the Lonsdor K518 PRO tool. The process involves both reading data directly from the Central Electronic Module (CEM) and performing key programming via the OBD-II port.

Tools Required:

Lonsdor K518 PRO

OBD communication cable

KPROG adapter

LC202 cable

A new smart key

Step-by-Step Procedure:

Part 1: Reading Data from the CEM Module

1. Disassemble and Access the CEM: 

Locate and carefully disassemble the Central Electronic Module (CEM) box from the vehicle. Follow the specific disassembly diagrams for your vehicle model.

2. Connect Hardware for Reading:

Connect the LC202 cable to your K518 PRO and the KPROG adapter.

Connect the 12-volt power cord to the K518 PRO.

Connect the KPROG adapter to the appropriate points on the CEM board to read the data.

3. Read CEM Data:

On the K518 PRO, navigate: [Immo & Remote] -> [Volvo] -> [S60] -> [2022-] -> [Program smart key] -> [Read CEM data].

Click [OK] to continue.

You will be prompted to enter a name for the backup file. Enter a name and proceed.

The tool will initialize the target chip and begin reading the data.

Once you see a "Read successfully" message, click [OK].

Reinstall the CEM: The CEM data has now been successfully backed up. Reinstall the CEM box into the vehicle before proceeding to the key programming stage.

Part 2: Programming the Smart Key via OBD

1. Connect Tool via OBD:

Plug the OBD communication cable into the vehicle's OBD-II port and connect it to the K518 PRO.

2. Start Key Programming Function:

Navigate: [Immo & Remote] -> [Volvo] -> [S60] -> [2022-] -> [Program smart key] -> [All smart key lost].

Then, select the second menu option: [Load CEM data to obtain 10-bit security code].

3. Load the Backup Data:

The tool will explain that this function requires the CEM data read via the KPROG adapter (supporting CEM main chip SPC5748G).

You will be prompted to select the PFLASH or DFLASH data file. Select the backup file you created in Part 1.

4. Confirm Key Deletion:

A warning message will appear stating that all registered keys will be deleted. Ensure you have all keys you wish to program ready.

The tool will connect to the vehicle and delete all existing keys. You will see a confirmation: "The number of programmed keys is 0".

5. Program the New Key:

You will be instructed to place the new smart key in the vehicle's induction area (typically the cup holder or center armrest).

Click [OK] to begin programming.

The tool will program the key. Once complete, you will see a message: "The number of programmed keys is 1".

If you do not need to program another key, click [Cancel].

6. Completion: The programming process is now complete. The newly programmed smart key should successfully start the vehicle.

www.obd2shop.co.uk

Lonsdor K518 PRO Programs 2011 Land Rover Discovery 4 key

This guide explains how to program new smart keys for a 2011 Land Rover Discovery 4 when all keys are lost, using the Lonsdor K518 PRO.

Tools Required:

Lonsdor K518 Key Programmer

OBD communication cable

Lonsdor JLR Smart Key

Step-by-Step Procedure:

1. Connect the Tool:

Plug the OBD cable into the vehicle's OBD port and into the Lonsdor K518.

2. Generate Smart Key:

From the main menu, select "Generate Smart Key" → Land Rover → Land Rover 433 ID49.

Place the new smart key into the K518 PRO slot and select "Generate."

Wait for the "Generation Successful" message.

3. Program the Smart Key:

Return to the main menu and select

Immobilizer & Remote → Land Rover → Select from vehicle → Discovery 4 → Program Smart Key → All smart keys lost.

Turn on the hazard lights when prompted.

4. Follow On-Screen Instructions:

The tool may ask if you want to program additional keys. Confirm or cancel as needed.

Hold each key in your hand as instructed and follow all prompts carefully:

Please switch the ignition off.

Programming...Within 5s, press the smart key(to be added)' unlock button once.

Locking... Within 5s to click the unlock button of the smart key to be added once.

5. Complete the Process:

Once programming is complete, test each key:

Step on the brake and press the start button.

Verify that the engine starts.

Test the remote lock and unlock functions.

Result:

Both keys should start the vehicle and operate the remote functions normally.

This Lonsdor K518 PRO tutorial helps you successfully program all-new smart keys for the Land Rover Discovery 4 - even in a full key-loss situation.

www.obd2shop.co.uk

Lonsdor K518 PRO Program 2024 BYD Qin L Smart Key OK

Here are the original car keys and a new key. We're using the Lonsdor K518 PRO to program the key adding for the 2024 BYD Qin L by OBD.

When programming car keys, all keys must be reprogrammed together. It doesn't matter if a key is old or new - any key that isn't reprogrammed will no longer work.

Immo & Remote >> BYD >> Smart Key >> Qin Series

Qin L is a new model launched in 2024. K518 PRO hasn't added it to the menu yet, so we'll select the "Qin Plus" option here.

Qin Plus >> 2023- >> Read Key Info

Put the original car key in the sensing area in the cup holder.

The number of programmed keys: 1

Program Smart Key >> OK

Keep the key in the sensing area.

Programming succeeds.

Press Yes to program the next one.

Take out the original key, and put the new key into the sensing area.

Program successfully.

The number of programmed keys: 2

Test the original key and the new key.

Both remote controls work normally and can start the car.

Done.

www.obd2shop.co.uk

Lonsdor K518 PRO Program 2021 Honda Civic All Key Lost Success

Now we are using the Lonsdor K518 PRO to program all keys lost for the 2019-2021 Honda Civic by OBD. As we have a new key at hand, let's get started.

Immo & Remote >> Honda >> Select by vehicle >> Asia >> Civic >> 2019-2021 >> Smart Key >> Push-button 47 chip >> All smart keys lost by OBD >> OK

Turn off the ignition.

We've lost all the keys, so we can't turn the ignition on.

Place a key to be programmed in the car, and take other keys out of the car.

Press the Start button twice to see if the car ignition is on.

Now we can't turn the ignition on, click "Cancel".

Press and hold the Start button.

Now the ignition has been turned on, click OK.

Enter the count of keys to be programmed: 1

Is it a new model car after 2020? Yes

Turn off the ignition in 15s.

Turn on the ignition in 15s.

Press the start button twice to turn on the ignition.

Whether the immobilizer light is off? Yes

Turn off the ignition in 15s.

Turn on the ignition again.

K518 Pro shows the current number of key: 1

Click OK.

Please turn off the ignition switch.

Turn on the ignition.

Please check whether each key can be used normally.

Turn off the ignition.

See if the remote control works properly.

Lock and unlock work. The key can start the car.

Done.

www.obd2shop.co.uk

New! Lonsdor LT30-02 Smart Key for 2024- Toyota Camry Sienna

New release! The Lonsdor LT30-02 Universal Smart Key is the new LT Series used for Toyota 4A-AA and 4A-BA. It works with the Lonsdor K518 PRO key programmer. The Lonsdor LT30-01 has the same functions as the Lonsdor LT30-01, with only a difference in the circuit board.

Board Number

4A-AA: 2000

4A-BA: 2561, 0110, 1320, 2550

Frequency

312.09/314.35MHz

312.50/314.00MHz

314.00/312.50MHz

314.35/312.09MHz

314.35/315.10MHz

315.10/314.35MHz

315.10MHz

433.58/434.42MHz

433.92MHz

434.42/433.58MHz

Supported Models

Camry(2024-)

Sienna(2024-)

Corolla(2022-)

Corolla Cross(2022-)

Levin(2022-)

www.obd2shop.co.uk

Lonsdor K518 PRO Program 2023 Buick GL8 Century via DOIP

Lonsdor K518 PRO is now able to program key addition and all keys lost for 2023—Buick GL8 Century and 2021-2022 Geely Monjaro. You need to use the new Lonsdor DOIP Cable, which is risk-free, convenient, and easy to use.

Following is programming 2023 Buick GL8 Century AKL for example.

Find the sensing area near the cigarette lighter.

IMMO & Remote >> Buick >> China >> GL8 Century >> 2023 >> Smart Key System(DOIP) >> All Smart Keys Lost

Lonsdor K518 prompts this function to require the DOIP Cable to connect the OBD port.

Turn on the ignition switch.

Since we didn't activate the car, turn on the hazard light. Press the ignition switch several times to activate the car system.

This car requires a password query on 3rd part platform. Please save the screenshot and inquiry password using VIN.

After getting the password, click OK.

Enter the password and authorization code(4 digits).

It takes about 10 minutes to configure the system...

Please put a key to be programmed into the key slot next to the cigarette lighter.

Leave it here and take the other keys outside the car.

At the same time, press and hold the ignition switch over 2s to 5s.

The dashboard shows No.2 key is ready, click OK. That means the 1st key is programmed.

Put another key to be programmed into the key slot, and take the 1st key out.

Press and hold the ignition switch over 2s to 5s.

The dashboard shows No.3 key is ready.

Key programming is successful, click OK.

The current count of keys: 2

Program completed.

Test the remote control, lock and unlock can work.

Both keys can start the engine.

Done.

www.obd2shop.co.uk