Lonsdor Super ADP 8A/4A Adapter for Toyota Lexus 2017+

Good news! Lonsdor Super ADP 8A/4A Adapter is coming with good bargin. Support latest 2017+ TOYOTA/ LEXUS smart key programming. Should work with Lonsdor K518ISE key programmer.

8A: DST-AES 88 A8 A9 AA

4A: HITAG-AES

Note: With Lonsdor ADP Adapter, no need to purchase Lonsdor Toyota AKL Online Calculation any more.

Functions

Backup IMMO data

Add key by OBD

All key lost

Delete key

Free password to program dealer key & Londor FT series smart key.

What’s Lonsdor Super ADP 8A/4A Adapter?

Lonsdor ADP 8A/4A Adapter can program keys for TOYOTA/ LEXUS 2017+ vehicles. Including 93C66, 2018+ TOYOTA/ LEXUS 0410/ 0440, TOYOTA 4A chip like Corolla, Levin, etc.

How to use Lonsdor Super ADP 8A/4A Adapter?

1. Insert ADP 8A/4A Adapter into K518ISE key programmer, then connect with OBD;

2. Plug the other long line of ADP Adapter into car smart box for IMMO data backup;

3. Follow the prompt to operate, to do add keys or all keys lost.

Buy Lonsdor K518ISE + ADP 8A/4A Adapter combination is also a great deal, more details please contact online service.

www.obd2shop.co.uk

Lonsdor KH100+ Program 2020 Toyota RAV4 All Key Lost Success

Lonsdor KH100+ can program 2020 Toyota RAV4 all key lost without OBD success.

You may like:

Lonsdor K518ISE program 2019-2021 Toyota RAV4 all key lost

http://blog.obd2shop.co.uk/lonsdor-k518ise-program-2019-2021-toyota-rav4-all-key-lost/

You’ll need:

1 year Toyota AKL Online Calculation License;

Lonsdor KH100+;

Lonsdor K518ISE;

Smart Key FT11-H0410C (for Toyota RAV4/ Highlander/ Avalon);

(If your car is Lexus ES/UX/LS/GX series, please select Smart Key FT08-H0440C)

Note: Make sure the WIFI connection is good. You don’t have to connect OBD.

Disassemble the key shell, take out PCB to begin programming.

Program Remote

Generate smart key >> FT smart key >> 8A type >> Generate smart key >> OK

Put the H0410C smart key into the KH100+ coil, press “Execute”.

Select the last frequency: 314.35/312.09

(Frequency may vary, USA frequencies range between 312 & 315.)

Place PCB board close to START/STOP button, push to begin vehicle data transfer to PCB.

Repeat every 10s until indicator pulses regularly flash.

Press “OK” when completed.

Note: 

If the Lonsdor unit fails to proceed, choose another frequency and repeat the previous process.

Do you have a working key? No

Generation is successful.

Test Key

If the car starts, but the remote doesn’t work, continue to the next step.

If the car starts and the remote does work, you’re done.

Modify Remote Count Value(used for remote doesn’t work)

Modify Remote Count Value >> OK

Put the H0410C smart key into the KH100+ coil, press “Execute”.

Note: DO NOT modify count to “00 00 00 00”! Otherwise, the remote will need to be restarted from the beginning of generating process.

Add 400 to the value shown and then modify. (eg. 1000+400=1400)

The numbers in sequence range from 1-F. When adding increments of 400, keep in mind 4+4=8, but 8+4=C

If it test fails, repeat the process until you find success.

Once the vehicle responds to the remote, you have found the correct modification value.

Write successful.

Test Key

The remote does work, and it can start the engine.

Done!

This is how to program a smart key for the 2020 Toyota RAV4 all keys lost with Lonsdor KH100+ successfully.

https://www.obd2shop.co.uk/

Lonsdor K518S/K518ISE Add Volvo S90(2017-) Key Success

Lonsdor K518S & Lonsdor K518ISE can support to add a key for Volvo S90(2017-) success. 

Latest Volvo Super Update was claimed to include cars like XC40(2020-)/ XC60(2018-)/ XC90(2015-)/ S60(2020-)/ S90(2017-)/ V60(2018-)/ V90(2016-) for reading and programming.

Londor K518ISE/K518S Volvo Super Update Car List:

http://blog.obd2shop.co.uk/lonsdor-k518ise-k518s-volvo-super-update-car-list/

How to add a key for Volvo S90(2017-)?

Prepare a key to be programmed.

Dismantle car CEM under the steering wheel, use KPROG to read data, reinstall the CEM back to the car after saving data.

Connect K518S/K518ISE with OBD2 port, go to:

Volvo S90 >> 2017- >> Add smart key >> OK >> OK >> Select the saved CEM data file, yes

Turn the ignition switch on.

Confirm the currently programmed keys(3), press “OK”.

Put the new key to be programmed in the induction area(cup holder).

Currently programmed keys: 4

One key adding is successful.

Press “OK” to program the next one, press “Cancel” to complete.

Let’s test the new key, it does work well.

Key programming has done!

This is how to use Lonsdor K518S/K518ISE to program Volvo S90(2017-) a new key step by step.

https://www.obd2shop.co.uk/

Lonsdor K518ISE Program 2019-2021 Toyota RAV4 All Key Lost

Using Lonsdor K518ISE to program 2019-2021 Toyota RAV4 AKL(all keys lost), you’ll need a 2020 Toyota Online Calculation License, Lonsdor Smart Key(FT11 H0410C), and strong WIFI. It is no OBD necessary.

The 2020 Toyota AKL yearly authorization covers:

Toyota - RAV4, Highlander, Avalon;

Lexus - ES, UX, LS, GX series(compatible Smart Key FT08-H0440C)

To start programming, disassemble the outer shell of the smart key, take out the PCB board to use the backside for best signal and reception.

Generate Remote

Go to the K518ISE Key Programmer main page, press

Special functions >> Key settings >> FT smart key >> 8A >> Generate smart key >> OK

Put H0440C/H0410C smart key into the K518ISE card slot.

Select key frequency, press “OK”.

Note: frequency may vary, USA frequencies range between 312 & 315.

Take all keys outside the vehicle, press the START button, put the H0440C/H0410C key close to the button, wait for 10s until the key’s light flashes. 

If the light doesn’t flash, press the START button once again.

Put H0440C/H0410C key which collected data back to K518ISE’s card slot, to start key generation.

Note: failure & success

At this point, if the Lonsdor smart key fails to proceed, choose another frequency, then repeat previous operations.

Do you have a working key? No.

Generated successfully.

Test Key

Note: 

If the car starts, but the remote doesn’t work, continue to the next step.

If everything works, it is not needed, you’re done.

Modify Remote Count Value(for remote doesn’t work)

Go to press “Modify remote count value”.

This spare function is to be used when the remote doesn’t work after online smart key generation. Press “OK”.

Put the smart key generated online into the K518ISE card slot.

Press “OK” to modify the current remote count value.

Input new remote count value.

(Add 400 to the value shown and then modify)

OK >> OK

Note: modifying made simple.

The numbers in sequence range from 1-F. When adding increments of 400 keep in mind 4+4=8, but 8+4=C

Modified successfully, please test if remote works properly.

If the test fails, repeat the process to add increments of 400 until you find success. Remember the sequence ranges from 1 to F.

Once the vehicle responds to the remote, you’ve found the correct modification value.

The remote is working, as well as all buttons are working.

Key programming has done!

This is how to program a smart key for 2019-2021 Toyota RAV4 all keys lost with Lonsdor K518ISE scanner successfully.

https://www.obd2shop.co.uk/

Lonsdor K518ISE/K518S Volvo Super Update Car List

Lonsdor has released Volvo Super Update software authorization on 14th, May. 2021. It applies to Lonsdor K518ISE & Lonsdor K518S key programmer.

Volvo Car List Updates:

Added XC40(2020-), XC60(2018-), XC90(2015-), S60(2020-), S90(2017-), V60(2018-), V90(2016-), support data reading & programming.

Note: This function requires opening a Volvo license(with free LYNK&CO). Please check with the Lonsdor dealer for the details.

Lonsdor K518ISE can program Volvo XC40 all key lost success.

Operation video:

https://www.youtube.com/watch?v=7ylzQXARE8U

Procedure:

It requires dismantling CEM above the driver’s pedal to read data beforehand. Please reinstall the CEM back to the car after saving data completed.

Connect Lonsdor K518ISE with OBD2 port, press

Volvo XC40 >> 2020- >> All smart key lost >> Select the saved CEM FLASH data file

All key lost will delete all programmed keys, please prepare keys to be programmed.

Current key number: 1

All programmed keys were deleted, press “OK” to go on adding keys.

Current key number: 0

Put the key to be programmed in the induction area(armrest box).

Program 1 key success, press “OK” to add more, press “Cancel” to complete.

Test the new key, it does work well.

Key programming was done!

More Volvo latest car key programming to be tested...

https://www.obd2shop.co.uk/

How to Bind Lonsdor SKE Smart Key Emulator to K518ISE?

This post is going to show how to bind a Lonsdor SKE Smart Key Emulator to K518ISE Key Programmer. SKE emulator has used for all keys lost scenarios mainly with Toyota & Subaru, which allows doing key programming via OBD.

Steps - How To Bind

1. Open up the emulator outer shell to put a 2032 battery in. Once done, you can see the power light on PCB when pressing the button. Put the mainboard back inside the shell.

2. Go to Lonsdor K518ISE scanner, press

Immo & remote >> Toyota >> Select from type >> All smart key lost >> All key lost >> Bind SKE >> OK

Put the SKE Emulator into the K518 key slot, press “OK”.

Key binding success, this key is available to program for all key lost.

Press “OK”.

Done!

Now you can use Lonsdor K518ISE + SKE Emulator to program for all key lost.

https://www.obd2shop.co.uk/