Monday 27 November 2017

Lonsdor K518 program Porsche Cayenne instructions

This post is guide about Lonsdor K518 program Porsche Cayenne, you can free download from:

https://www.obd2shop.co.uk/upload/service/k518-do-porsche-caynne-instruction.pdf

Basically, there will be 4 parts in the whole help file: Function, Reference, Attention and Operation.

Function
1. Program smart key: to program smart card (please make dealer key first);
2. Make dealer key: use the backed up BIN data to make the non-dedicated key to be dealer key.

Reference
Chip type: Dedicated smart card
Frequency: 315/433/434 frequency (please check the logo in the lower right of
the lid of the BCM box)
Key embryo no.: 31
Code requirement :Dismantle & read BCM to make dealer key
Key generation: Program smart key complete, remote will automatically
generated

Under the steering wheel (BCM position):

Lonsdor K518 program Porsche Cayenne instructions-1

BCM is located at the bottom left of the steering wheel, please note the
frequency type, basically there will be 315/433/434,

The following picture is for 434 frequency:

Lonsdor K518 program Porsche Cayenne instructions-2
11-15 Cayenne Car Model


The car key
The induction keyhole

The mechanical knob key inserted into the induction keyhole
Attention
1. All the keys need to learn, or it will not be able to start the vehicle, it is
recommended to learn the original car keys first,and then learn the new key,
battery must be well installed.
2. The newly added key must be either the dealer key made via the car BCM
data, or the key ordered back through the VIN code.
3. When learning key, it is required to insert the key into the induction keyhole,
to learn a smart key, remove the machanical rotate key from the induction
keyhole if any and then insert the smart key to program.

Operation

Step 1: Use the programmer to read and write BCM data and save it as bin
file;
1. BCM is located in the lower left of the steering wheel, please pay attention to
view the frequency type, usually there will be 315,433,434 frequency (below
picture is for 434):
2. Read the BIN (D-FLASH / EEPROM) file with the programmer specifically
for reading BCM. Please pay attention to the type here: namely 1L15Y 2M25J
metal crystal, or 5M48H 1N35H ceramic crystal (red mark):

3. Please refer to the following picture to wire:


Step 2: Copy the bin file into K518ISE: please use the USB cable to connect
the K518ISE to the computer, open the device internal memory, find the folder
"customfile" and copy the bin file into it (as shows belowl).

Note: bin file suffix "bin" must be lower case letters, directly put the file into th folder rather than create a new folder:

Step 3: Make dealer key
Step 4: Program smart key

Lonsdor K518 sales on obd2shop.co.uk: http://www.obd2shop.co.uk/wholesale/lonsdor-k518ise-key-programmer.html

http://blog.obd2shop.co.uk/lonsdor-k518-program-porsche-cayenne-instruction/


No comments:

Post a Comment

Lonsdor KW100: Quick Generate for Toyota/Lexus AKL/Add Key

The 2024 New Lonsdor KW100 Accessory pre-order is available now. Supports quick identify Toyota/Lexus smart key in key adding or all keys l...