How to Bind LKE Smart Key Emulator to Lonsdor K518ISE?

This is a quick demo to show how to bind LKE Smart Key Emulator to Lonsdor K518ISE Key Programmer for the first time. Please noted each LKE can only bond to one K518 programmer, it's unable to unbind after binding.

Check operations on Youtube:

K518 Path:

Special function >> Simulate chip >> Bind simulate chip >> Bind emulated chip

Please place key emulator into Lonsdor K518ISE card slot.

This LKE is not bound!

Note:

1. Unable to unbind the LKE after binding it completely.

2. One LKE can only be bound to one device.

Continue to generate key emulator, you will need to bind it to this device, please operate with caution!

Whether to bind this LKE to this device host?

If yes, please put the LKE into the card slot, and click "OK" to continue.

Bound successfully!

Now you can start to generate key emulator in Immo & remote.

http://blog.obd2shop.co.uk/how-to-bind-lke-smart-key-emulator-to-lonsdor-k518ise/

Lonsdor K518S + LKE Program 2015 Toyota Crown AKL Success

This is a guide to show how to program 2015 Toyota Crown all keys lost successfully with Lonsdor K518 Plus LKE Smart Key. Easy and fast in 4 minutes via OBD.

Connect K518S Key Programmer to OBD,

1. Backup EEPROM Data

Immo & remote >> Toyota >> Select from type >> All smart key lost >> All key lost >> Backup EEPROM Data

1) This function can back up car EPROM data.

2) When backup complete, go to "Make emulator key" to make an emergency emulator key.

3) Use the key to touch the start button to ignition dashboard and add key.

Press "OK".

2. Generate LKE

Select "Generate LKE".

This function can generate an alternate master key when all the key are lost. This key can replace the original working key to turn on the dashboard to add key.

Please place LKE Key Emulator into K518 card slot.

The key emulator(LKE) is already bound to the device, whether to choose the required EEPROM backup file to generate LKE?

OK >> Load data file

Current EPROM info:

Count of keys: 1

Key type: A8

Once the key is generated, put the spare key close to the ignition, turn on the dashboard, and select "Add key" function to program new key.

3. Add New Key

Put an emulator key or workable original key close to the ignition switch, and turn it ON till the dashboard is lit up.

Count of the registered keys:1

Put the back side of the registered key close to the start button, when buzzer rings once, remove the key.

Within 30s to put back of the key(to be registered) close to car start button, when buzzer beeps twice, remove the key.

Operation completed!

Count of the registered keys:2

4. Test Key

Test the new key now.

The remote works fine, and it can start the engine.

Done.

Read also:

Lonsdor K518ISE + ADP Adapter Program 2021 Toyota RAV4 AKL

http://blog.obd2shop.co.uk/lonsdor-k518ise-adp-adapter-program-2021-toyota-rav4-akl/

Lonsdor K518ISE + ADP Adapter Program 2021 Toyota RAV4 AKL

Lonsdor K518ISE + ADP 8A/4A Adapter can program 2021 Toyota RAV 4 all keys lost successfully. No need to disassemble, should use LKE smart key to make an emergency key firstly.

Follow is the procedure:

Connect to EPES module.

Insert ADP 8A/4A Adapter into K518ISE programmer.

Backup Immo Data

Immo & remote >> TOYOTA >> Select from type >> all smart key lost(2016-) >> 8A >> Backup immo data >> Read notes, OK >> OK >> Enter file name to save >> OK

Immo data backed up successfully.

Remember to record file path.

Press "OK" to continue.

Generate Emergency Key

This function can load backup data to generate an emergency key in AKL situation, then use this key to turn on dashboard to add keys.

Press "OK".

This function requires Internet connection.

Please put key emulator into K518 Programmer card slot and press "OK".

Select backup file, press "OK".

Read operation hints:

1. Press ignition switch once.

2. Quickly place LKE vertically on ignition switch, keep the antenna end of LKE aimed at the central position of ignition switch, and wait until dashboard lights up.

3. If dashboard fails to light up after 3s, please try to repeat step 1&2.

4. If dashboard fails to light up after multiple attempts, please contact after-sales for technical support.

Press "OK".

Reconnect the original car cable and touch the key to START button.

The car successfully worked.

Add New Key

Key info:

TOYOTA RAV4 2019-2021 genuine smart remote key,

315Mhz,

8990H-0R030.

Press "Add smart key".

Please switch ignition ON.

This function can use a registered working key or emergency key to add new keys.

Turn ignition off, turn on 2 flashing lights.

Select "Load D-FLASH data of PEPS to acquire 12-bit PIN".

OK >> Load backup dat

Wait for processing...

Count of the registered keys: 2

Count of registrable keys: 5

Press "OK".

Step1. Hold the registered smart key or generated emergency key closer to Start button, the buzzer beeps once, take the key away from the button.

Step2. Hold the smart key(to be registered) closer to Start button, the buzzer beeps twice, then take the key away from the button. To program more keys, please repeat step2.

Finish above steps within 30s.

Count of registered keys: 3

Count of registrable keys: 4

Please follow the prompts to finish operation, press "OK".

Switch ignition ON.

The car & remote worked successfully.

This is how to use Lonsdor K518ISE to program 2021 Toyota RAV 4 all keys lost successfully.

http://blog.obd2shop.co.uk/lonsdor-k518ise-adp-adapter-program-2021-toyota-rav4-akl/

Solution: Lonsdor K518ISE Program 8A Key Trunk Button Failure

Problem: I just programmed these Lonsdor 8A Universal Smart Keys to a 2020 RAV4 that were supplied by you. They were great with Lonsdor K518ISE, but the trunk button does not work. Any ideas?

Solution

In case Lonsdor 8A key only trunk button failure but other buttons OK, users can follow the method below to solve the problem.

Lonsdor K518ISE Path:

Special function >> Key settings >> FT smart key >> 8A >> Convert button type >> Button 3 Trunk-Button 4 Panic, Confirm

Put Lonsdor Smart Key into K518ISE programmer card slot.

Done.

Hope this is helpful.

Technical support

http://blog.obd2shop.co.uk/solution-lonsdor-k518ise-program-8a-key-trunk-button-failure/

How to fix data getting error when using Lonsdor LKE key emulator

Customer question: Why do I keep getting the following error message when using the Lonsdor LKE smart key emulator?

The technician replied:

Reinstall the battery and follow the steps below:

Insert the LKE smart key emulator into the K518ISE device card slot,

Select "Special functions" in the device interface

Then, select "Simulate chip" == >> "Obtain LKE data" == >> "Obtain LKE key data"

Downloading application...

Generating...

Then, you will get the following information:

Click "OK" to continue, then click the return sign in the upper right corner of the device to return to the previous interface, select "Generate Simulated Chip" == >> "4D" == >> " 4D chip emulation

Downloading application...

Displays the following information:

Click "OK" to continue

Generating...

The function test of the LKE smart key emulator was successful.

The operation of the video is as follows:

For additional technical support questions, please contact:

https://www.obd2shop.co.uk/